- 2026-04-17
- 2026-04-13
- 2026-04-03
- 2026-04-01
- 2026-03-19
Thermal layer coat slurry
Product Description:
①This coating is a thermal layer coating, using a sand mill fine grinding D90<1um raw materials, optimize the process, production with specific formula.
②The coating has fine and uniform particle size, resulting in clear printing and excellent preservation properties in the finished product, while saving more than 10% of the amount used compared to ordinary thermal coatings.
③It has wide adaptability and can be used for various coating methods such as doctor blade, air knife, and polishing rod.
④Both materials A and B have high solid content, both can reach 40%.
⑤Easy to use, with two materials, A and B. Mix them according to the indicated ratio, add water to reduce to the required solid content, and then apply on the machine.
product parameters:
|
Appearance
|
Milky White liquid
|
|
solid content
|
40% |
|
viscosity
|
80-120mPa.s |
|
coating weight (dry weight)
|
3.0-3.5g/m2 |
Application areas:
Thermal layer coatings are suitable for paper, film, and label applications, and their function is to transform these materials into thermal image receiving materials.
|
varieties |
Description |
Remarks |
|
Ordinary thermal type
|
Coatings for ordinary cash register paper
|
|
|
non BPA thermal type
|
For BPA-free cash register paper
|
|
|
long preservation type
|
The paper can be stored normally for more than 2 years before and after printing without affecting its use.
|
|
|
water proof type
|
Soaking printed content in water or exposing it to water before drying will not affect the color development of the printed content.
|
|
|
anti-grease type
|
Contact between printed content and grease will not affect the color development of the content.
|
|
|
High temperature resistant type
|
The color density of thermal paper is less than 0.25 at 90℃.
|
to be used together with our precoat
|
Product Application:
1. After coating, properly press the surface flat, the color rendering situation will be better, and the low-energy color rendering effect will be better.
2. During use, it is necessary to ensure the uniformity of the coating. If stratification occurs, use a mixer to disperse evenly.
3.The drying temperature should generally be controlled at 60-70℃. It is normal if no color develops.
4, high chemical stability, suitable for a variety of use scenarios.
packaging storage:
1: Packing is 1000kg/barrel
2: avoid direct sunlight, storage period of 180 days
Note:The data and items in this document are recorded according to the test results and investigation of the company, so it cannot be guaranteed to be completely consistent with the results on the operation site. When using, please confirm your company's purpose and whether the conditions are appropriate. At the same time, the above data is the result of the completion of this information, please note that there may be updates in the future.
